How Do You Explain Car Locks Repair To A Five-Year-Old
How Do You Explain Car Locks Repair To A Five-Year-Old
Blog Article
Car Locks Repair
Typically, a locksmith for cars will work with both the power and manual door locks. Manual lock issues are more common but they can be difficult to solve.
A good preventative measure is to apply a lubricant for the door lock in winter, like WD-40. It will absorb the moisture and stop it from freezing in the keyhole.
Door Lock Cylinder Replacement
It's a good idea replace the door lock's cylinders as soon as possible if you lose your car keys or suspect someone else has. This will ensure that you're only the person who can access your car, and keep burglars and other unauthorised individuals out of it. Unfortunately, replacing a car door cylinder can be quite difficult, as it requires at minimum disassembly of the interior door panel in the majority of cases. It is not something that the majority of people would prefer to do on their own. It could be risky when done incorrectly.
The lock cylinder must be removed from the handle first. You'll have to locate the screw at the top of the housing (usually upper right corner). It may be hidden under plastic pieces or barely visible. If you are unable to locate it, take off any trim panels that block your view. Then, use a hammer or awl, or a small screwdriver to loosen the lock cylinder retaining tab and pull the cylinder straight out of the housing.
After you have the cylinder removed, there are a few things that must be done to prepare it to use. The keyway must be cleaned of grease and dirt and the cylinder needs to be lubricated to keep it from getting stuck in the lock. The easiest way to do this is to use a brake cleaner, which will both clean and lubricate the lock cylinder components. After cleaning the cylinder you can take off the 10mm bolt that holds the handle to cylinder housing with a screwdriver.
You can then put in the new cylinder and use it with your original key. It is best to purchase one that is the same brand and model as the one you have. This will ensure that it fits correctly and provides a secure seal. After installation and the door is tested, ensure that the lock is working properly and the door can be closed securely.
Door Lock Cylinder Repair
The lock cylinder is the part of your car door keys fit into to unlock or secure the door. If the key is stuck inside the lock or you have trouble turning it, this could indicate that the door cylinder has to be replaced.
The lock is normally located near the door handle. However, some cars place it behind a piece of plastic. When you turn the key, the pins of the cylinder align with the cuts on the key head, allowing you move the lock and unlock the car door. If you have a surface-mounted cylinder take off the faceplate on the door handle and unscrew one or two cylinder setscrews.
After the screw is removed, you can turn it to take the door off. Place the screws in a bag or in a safe location to replace them later. Then, you need to take the key and place it in the lock to see if the tumblers/pins are moving freely or becoming stuck. If the cylinder is stumbling or you feel or hear a click, it's time to replace it.
You can purchase new cylinders for your car at any auto parts shop however, you'll need know the model and make of your car before you shop. You can also call an locksmith to change the door cylinder. They'll be able to match the new unit to the key you have already, to allow you to use your original lock.
The most common problem with the cylinder for a car lock is that it won't rotate when you attempt to use your key. This could be due to dirt or corrosion that has built up, who fixes car door locks preventing the cylinder from moving freely. It is easy to fix this problem by lubricating your mechanism. You can make use of brake cleaner or white grease to eliminate any grime and rust. This method is only effective on a cylinder that is jammed. It can't solve any other problems.
Door Lock Repair
A door lock could be stuck due to dirt, rust or other debris. It is often possible to fix this by spraying the mechanism with a lubricant, such as WD-40. This will help unblock the mechanism and also prevent the problem from occurring in the future. If you're unable to turn the lock, try wiggling the rod with needle-nosed pliers. If this doesn't work, you should call locksmiths to replace the lock.
A misalignment issue is another frequent issue with doorlocks. This makes it difficult to use the lock and also a security issue because it makes it easier to bypass the door in a bid to get in. A locksmith should be called to address the issue, but you can usually fix the problem yourself.
To resolve this issue begin by inspecting the door lock to determine the cause of why it does not function properly. If the issue is caused by an incorrectly aligned strike plate or deadbolt, tighten the screws that secure these components. Reposition the bolt and strikeplate to align them with the door frame.
If the issue is that the key won't turn or slide in, a little graphite in the keyhole can sometimes solve this problem. You can apply graphite by squeezing the tube or dusting a spare key. Put the key in into the lock, and then turn it a couple of times to get the graphite working into the mechanism. If this doesn't work you, take off the doorknob and examine the spindle. It could be worn out.
The procedure to remove the door handle or door panel is different from vehicle to vehicle, but the general procedure is similar. After you have removed the panel, you will have to find the set screws that are holding the lock cylinder. These screws are located on either the inside of the handle or in the middle of the panel, depending on the model. Remove the screws and align the cylinder with the keyway. There is a risk of damaging the components if tightening too tightly the screws.
Door Lock Replacement
If your lock is worn-out or looks a bit old, replacing it will give you a new appearance. It's a relatively simple process that can be accomplished at home with just a few steps. Be sure to be sure to measure your door's latch and deadbolt settings, as you will need to make sure that the new locks are properly set.
Remove the screws that secure the knob plate to the door. Take the knob and latch out. If the inside plate has no screws and is purely decorative take it off gently using an screwdriver. The plate may be secured by pins or snap off the edge. Once the plate has been removed, you can easily remove both the deadbolt and latch.
It's time to put in the new lock plates. The exterior and interior plates should be lined up with the deadbolt holes on the door jamb. The long metal spindle of the lock cylinder needs to pass through both holes. Once the plates are positioned, hand-thread screws into the screw holes to hold them together loosely. If the plate does not have any screw holes then you can simply slide it over the latch.
Use the screws that came with the lock kit you purchased instead of the ones you already have. Instead make use of the screws included in your new lock kit. If you don't have the right size of screws, then go to your hardware store or home improvement store to purchase some that will be compatible with the rest of your new door lock's hardware.
Be sure that your new deadbolt and latch plates are the same length as the original ones and that they are aligned over the latch hole in the door jamb. After everything is in place you can push the remaining screws to tighten them securely. You can now test the latch and deadbolt using your key. If the key won't turn then it's time to contact locksmith.